Decorative ball-storage solution

Create an eye-catching storage net

Our DIY ball-storage net is easy to make, extremely practical and a great addition to your home décor. Fans of ball games, young and old alike, are guaranteed to love it! It’s even easier to construct and attach your storage net if you use the deep hole spray marker and mechanical carpenter pencil from edding to help you – two extremely handy products that are a must for any toolbox.

Категорию: Детская комната
Продукты: Special solutions
Поверхности: Concrete and stone
Wood
Степень сложности: Немного сложновато
Скачено: Изображения (zip)

Пошаговая инструкция

Шаг 1

You can see everything you need for this project in the picture below.

Шаг 2

Use your carpenter pencil to pre-mark five holes. Space them 10 cm apart along the centre of each timber baton. These will be used for threading the bungee cords.

Шаг 3

To ensure that the timber batons sit flush to the wall, saw off each of the ends at a 45-degree angle.

Шаг 4

Drill the holes you marked out in the previous step. These will be used for threading the bungee cord. You will also need to add drill holes at both ends of each baton, ready for fixing the batons to the wall.

Шаг 5

Hold your first baton in position in the corner of your room. Place the tip of the deep hole spray marker into each drill hole and press down once to mark the hole.

Шаг 6

Drill the two holes into the wall and wipe away any remaining green chalk using a damp cloth. Repeat the same process with your second baton.

Шаг 7

Measure the height of your ball net so that you can work out how long your bungee cords need to be. Next, cut the cords to the right length, thread each cord through the holes in the top baton and tie with a knot at the back.