edding 5200 N permanent spray sprayhead display

edding 5200 permanent spray sprayhead set

From a fine line right up to large areas: versatility is our strength! That's why we offer an adapter set of interchangeable sprayheads. Fine, medium, wide or variable. Pick the appropriate one for your needs for a customised spray jet width. The edding permanent spray sprayhead set... let your ideas run wild!

Sprayhead-fine
Sprayhead-medium
Sprayhead-wide
Sprayhead-variable

19126 - advent calendar from outer space

Details

Practical clip strip for flexible and space-saving presentation opportunity of blister cards
Ideal for cross-placements on shelves
Exchangeable spray heads in 4 different spray widths from fine lines to large areas, for the optimal implementation of creative ideas
The set contains sprayheads in spray widths fine (ca. 1 cm), medium (ca. 4-5 cm), wide (ca. 8-10 cm) and variable (ca. 13-14 cm)
The spray nozzle can be adjusted horizontally/vertically
Compatible with edding 5200 permanent spray only (except edding 5200 permanent spray rust effect)

2x sprayhead white: spray width fine (approx. 1 cm)
2x sprayhead black: spray width medium (approx. 4-5 cm)
1x sprayhead gold: spray width wide (approx. 8-10 cm)
1x sprayhead red (professional): spray width extra-wide (ca.13-14 cm). The nozzle can be placed horizontally and vertically
High-quality brand product
Made in Germany

The spray can should be at room temperature (15-25 °C). If possible, spray outdoors or in a well-ventilated room. When spraying indoors, ensure the surrounding surfaces are adequately protected. Mask any areas that are not to be painted
The item you are going to spray must be dry, clean and free from traces of grease or rust. Remove any large surface irregularities with a scraper or by sanding. Use edding Primer for Plastic or edding Universal Primer (note drying times)
To remove the safety ring, first remove the cap and then the sprayhead. The outer edge of the safety ring can then be lifted off with a screwdriver or similar item. Take care not to damage the can when doing this
Shake the can vigorously for about 3 minutes so you can clearly hear the rattle of the mixing balls. Shake up the paint again, even after short pauses in painting
Always carry out a test spray, for example on newspaper or masking paper. Start spraying beyond the edge of the object, at a distance of 25 cm from the item. Depress the sprayhead firmly as you move. Holding the spray can vertically, slowly move it back and forth with even strokes; make the turning movement away from the object (for vertical and horizontal strokes)
Smaller surfaces are best sprayed in one go, in a spiral motion working outwards from the center
If required, apply another coat of spray paint, using the wet on wet technique, reapplying while the previous coat is still wet, i.e. at intervals of 1-2 minutes

edding 5200 permanent spray sprayhead set

edding 5200 permanent spray sprayhead set

Details

Selling units

Related products

edding 5200 permanent spray premium acrylic paint

edding 5200 permanent spray universal primer

edding 5200 permanent spray plastic primer

edding 5200 permanent spray clear lacquer